Cleaning and Inspection
This chapter discusses the cleaning and inspection of culverts and storm sewers....
Evaluation and Condition Assessment
To determine whether a culvert or storm sewer needs to be renewed, an inspection needs to be conducted and the findings recorded. The first step in such a program is to establish a standard...
Slope Effect on House Shrink-Swell Movements
(Originally published in
Discussion of Time for Development of Internal Erosion and Piping in Embankment Dams by Robin Fell, Chi Fai Wan, John Cyganiewicz, and Mark Foster
(Originally published in
Simulating Radionuclide Transport Away from an Underground Nuclear Test: Linking Non-Isothermal Flow and Mechanistic Reactive Transport
The low-yield (0.75 kiloton) Cambric underground nuclear test situated in alluvium below the water table offers unique perspectives on radionuclide transport in groundwater. The Cambric...
Coupling Physical, Chemical, or Biological Methods for Innovative Groundwater Remediation Coupled Polymer Floods and Bio-Chemical Remediation Techniques for Enhanced Groundwater Treatment
Many groundwater remediation techniques are designed to remove or destroy contaminants
Hydrologic Comparison of Four Types of Permeable Pavement and Standard Asphalt in Eastern North Carolina
A permeable pavement parking lot in eastern North Carolina consisting of four types of permeable pavement and standard asphalt was monitored from June 2006 to July 2007 for hydrologic...
Size and Scale Effects on the Shear Strength of Concrete Beams
This paper identifies and discusses the role of proper geometric scale of relevant parameters in the size effect in shear, particularly in terms of practical beam design. In the overall...
2008 Civil Engineering Industry Buyer' Guide
A Special Supplement to Civil Engineering Magazine
This guide covers the following topics: Construction materials; Geotechnical and environmental; Information technology; Pipelines, sewers, and accessories; Professional and professional...
Structural Condition Assessment
In Structural Condition Assessment, editor-in-chief Robert Ratay gathers together the leading people in the field to produce the first unified resource on all aspects of structural condition...
Offshore Technology in Civil Engineering
Hall of Fame Papers from the Early Years
Prepared by the Subcommittee on Offshore Technology Conference Support of the Coasts, Oceans, Ports, and Rivers Institute of ASCE. This series presents...
Concrete Biaxial Column: Composite Circular Column
This chapter discusses the tabulation of composite circular column data in Microsoft Excel....
LRFD Compared to Working Strength Loads: Introduction
This chapter introduces the subject of load resistance factor design as compared to working strength loads....
LRFD Compared to Working Strength Loads
This chapter contains examples used to demonstrate the design of footings to resist seismic loads....
Strength Design in Aluminum
A Review of Three Codes
Prepared by the Task Committee on Strength Design in Aluminum of the Committee on Special Structures of the Committee on Metals of the Structural Engineering Institute of ASCE. ...
On the Inelastic Design of Steel I Girder Bridges
This paper documents the development of a relatively easy to use set of effective plastic moment expressions and compares the performance of these equations with a series of experimental...
A More Perfect Union
Established to promote greater public understanding of the United States Constitution, the National Constitution Center facility in Philadelphia is a structure of complex geometries articulated...
Torsion of Reinforced Concrete -A Historical Overview
The story of torsion of reinforced concrete must start with the French professor, C. L. Navier. In his landmark book (Navier, 1826) he rigorously derived the first rational theory for...
Overview of Structural Behavior of Members Subjected to Torsion
The torsion strength of concrete beams depends on many factors, such as the amount of reinforcement, the volumetric ratios of longitudinal and transverse steel bars, the concrete strength,...
Advances in Analytical Modeling of Torsional Members
The basic formula for calculating the torsional strength of reinforced concrete members was developed by Rausch (1929) using the space truss concept. Unfortunately, Rausch's equation may...
Return to search